CONSTRUCTION STANDARDS
The vessel is built in accordance with the MCA-MGN-280 “Vessel operating category 2”.
PROPULSION AND STEERING SYSTEM
3.1. Engines - 2 x MTU model 12V2000M96L, 12 cilinders, 1 432 kw, 1920 hp at 2 450 rpm.
3.2. Transmission - 2 x ZF 3050 reduction 3.00:1.
3.3. Propellers - 2 x NiAlBr propeller, VEEM Ultraskew 42”.
3.4. Propeller shafts - 2 x Stainless steel 1.4462 Propeller shaft (Ø100mm).
3.5. Rudder shafts - 2 x Stainless-steel duplex C301.4462 rudder shaft.
3.6. Rudder blades - 2 x NACA 63A stainless steel rudder blade.
3.7. 2 x Water lubricated rudder tube.
3.8. MTU "blue vision" engine control includes:
- 3.8.1. 1 x Main helmstation steering position MTU "blue vision" engine control.
- 3.8.2. 1 x Flybridge steering position MTU "blue vision" engine control.
- 3.8.3. Remote control MTU (wired) used for docking (mobile docking station) with a connection at the cockpit
3.9. Hydraulic bow-thruster (force 45hp Hydrosta).
3.10. Stern thruster (force 35hp Hydrosta).
3.11. Hydraulic trim system (Hydrosta).
3.12. 1 x "Seekeeper" 35 electric gyroscopic stabilizing system.
GENERAL EXTERIOR
4.1. Full Aluminium Hull & Superstructure (special seaworthy shipbuilding Aluminium (AIMg4,5 Mn - H321/H111), with certificate).
4.2. Hull and superstructure fully sandblusted or grinded outside / treated with the acide inside.
4.3. Hull and superstructure painted with High Quality 2-component “paint” system Alexseal (according to COT norms). The color of the paint will be RAL 5024.
4.4. Antifouling paint (International Interspeed Extra) of the hull below waterline will be black.
4.5. Electronic antifouling system ("Ultra 20 series", 2 transducers).
4.6. Certified thermoisolation of the hull.
4.7. Full 15 mm solid teak decks, also on stairs (incl. the flybridge), swimming platform and flybridge. All steps have built-in LED-lights.
4.8. Front deck with seating and sunbathing area. Stairs to sunbathing area to be covered with teak steps, stainless design strips and black gloss paint.
4.9. Stainless steel (AISI 316) lists on the hull, half round.
4.10. Stainless steel (AISI 316) lists on the “exhausts”.
4.11. Stainless steel (AISI 316) oval railing around the perimeter of the main deck, luxury design.
4.12. Teak wood bulwark cappings.
4.13. Design elements of stainless steel AISI 316 on the left side and starboard.
4.14. Stainless steel (AISI 316) handrails.
4.15. Arch-shaped mast on the flybridge.
4.16. Opacmare electric curved (AISI 316) stainless steel saloon/cockpit sliding doors, incl. double glazed grey tinted security glass.
4.17. Grey tinted double-glazed & hardened security glass windows.
4.18. Stainless steel (AISI 316) portholes with fly-screens.
4.19. Stairs to swimming platform secured by stainless steel doors (AISI 316) with logotype of shipyard. Customized design.
4.20. Outside tables in glossy finished teak wood.
4.21. High quailty luxury exterior upholstery (incl. seats, sun beds, covers etc.) including full set of the pillows and seats of cockpit, bow and flybridge.
4.22. Large entrance/service hatch to engine room on swimming platform.
4.23. Opacmare electrical side door (starboard).
4.24. Opacmare companion way door (pilothouse to flybridge).
4.25. 1 x Stainless steel side (AISI 316) stepladder. Gates (bulwark doors) to the pier on portside and starboard.
4.26. 8 x Stainless steel (AISI 316) cleats [4x2] front and aft, plus 3x2 cleats mid ship.
4.27. 2 x Stainless steel (AISI 316) bollards on swimming platform.
4.28. 8 x Cylinder shaped inflatable PVC fenders 300 x 900 mm.
4.29. 2 x Sphere shaped inflatable PVC fenders 550 x 730 mm.
4.30. 8 x Fender cover (sock) 300 x 900 mm.
4.31. 2 x Fender cover (sock) 550 x 730 mm.
4.32. 10 x Fender rope 2800 mm length, 12 mm thick.
4.33. 4 x Rope 21.000 mm length, 16 mm thick.
4.34. 4 x Rope 16.000 mm length, 16 mm thick.
4.35. 1 x Dyneema towing line 100 000 mm length.
4.36. 2 x Plastic buckets with line.
4.37. 2 x Boat hooks.
4.38. Stainless steel flagpoles (AISI 316): 1 small on the bow, 1 large on the flybridge, 2 small on the arch of the flybridge.